Guides · 1 min read

How to measure a window opening, step by step

How to measure a window opening properly before asking for a quote: width and height at three points, shutters, boxes and photos.

Good measurements avoid most problems when replacing windows. If we install in Alicante, we measure for you. If your windows are being delivered to another part of Spain, this guide helps you take the measurements for your quote.

What you need

  • A tape measure (metal is best).
  • Pen and paper, or your phone for notes and photos.

1. Measure the width at three points

Measure the width of the opening at the top, in the middle and at the bottom, wall to wall. Openings are rarely perfect: write down all three and use the smallest.

2. Measure the height at three points

Measure the height on the left, in the centre and on the right, from the sill to the top of the opening. Again, use the smallest.

3. Check the shutter and box

Tell us if the window has a roller shutter, whether the box is inside or outside, and whether you want to keep or replace it. It changes the usable height of the window.

4. Take photos

A photo of the opening from inside and from outside, with the window closed, tells us more than many measurements: the type of sill, the shutter box, the trims…

5. Note how you want it to open

For each opening, think about the opening type you want: tilt and turn, sliding, casement… and which side it should open from.

A tip

Number the openings (for example "living room 1", "bedroom 2") and use the same name in your photos and measurements. That way the quote comes out window by window, without confusion.

Got them? Send them to us with the quote form.

Frequently asked questions

Common questions.

Do I measure the opening or the old window?

The structural opening. The new window is made for the opening, not to copy the old one, which may be a different size or out of shape.

Which size do I give if I get three different measurements?

The smallest, for both width and height. That way the window will definitely fit, and the gap is covered when sealing and finishing.

Can I ask for a quote without exact sizes?

Yes. With approximate sizes we give you an estimate, and the exact sizes are confirmed before manufacturing.

Ready to change your windows?

Free, no-obligation quote. We reply within one working day.